Beams of Light Public Menorah
A sturdy aluminum indoor/outdoor menorah that goes up in minutes with no tools. Light it with bright LEDs or switch to tiki torches for a real flame — both options come in the box.
Two sizes, same build
Both models include the full LED set and a set of tiki-torch adapters.
10 Ft Menorah + Tiki Adapters Set
- Sized for shuls, storefronts and public lightings
- Visible from far down the block
6 Ft Menorah + Tiki Adapters Set
- Great for front yards, porches and smaller venues
- Easier to transport and store
Built for setup in the cold
About 3 minutes, no tools
Branches slide on and lock; power connects through the frame as you assemble.
LED or real flame
Use the bright LED covers, or swap in the included adapters to hold standard tiki torches.
Dimmable, with smart modes
A dimmer knob and two buttons on the center branch control brightness, bulb count and automatic modes.
Solid aluminum
Brushed aluminum with an extra-wide base that folds flat. Made to handle wind, rain and snow.
Remembers its setting
If the power drops, it comes back on exactly where it was — no resetting the night's count.
Lit on both sides
Lights face both directions, so it looks right from the street and from the building.
What's in the box
Everything you need for both LED and real-flame lighting.
- ×1Folding base
- ×9LED bulbs
- ×1Center branch with dimmer & 2 buttons
- ×9Bulb covers
- ×8Snap-on branches
- ×9Tiki-torch adapters
- ×1Power strip
Assembly & operation
Watch the video, or follow the steps below.
Putting it together
- Open the baseRelease the levers, unfold the legs, then lock the levers again. On uneven ground, adjust the screw feet until it stands level.
- Ready the center branchPut the bulb into the center branch and attach its cover.
- Add the branchesJoin the center branch to the main stem, lining up the connectors, then attach the two smaller branches.
- Mount on the baseSlide the stem onto the base and tighten the lever to lock it.
- Plug inConnect power whenever you like — before or after the rest of assembly.
Controls & modes
Manual
Automatic modes
Frequently asked questions
Can I use it with a real flame?
Yes. Every menorah comes with a full set of adapters for standard tiki torches. Take off the plastic bulb cover, put in the adapter, and set the torch in place. Refillable torch canisters (usually about 7 cm across) are sold at hardware and home stores and online — remember to pick up fuel too.
How tall is it?
The flagship model stands 10 feet. There is also a 6 foot model.
Is it hard to assemble?
No. It was designed for drop-in, tool-free setup — no ladder needed. See the setup video above.
How strong is it?
The frame is aluminum extrusion and has been stress-tested for outdoor use. The base is unusually wide for stability and still folds flat for storage.
Do I need sandbags?
In normal weather the wide base keeps it standing on its own. If strong gusts or high winds are expected, add sandbags or similar weight.
Is it lit on both sides?
Yes.
Will it fit in my car?
Collapsed, it fits most vehicles. In a sedan you'll usually need to fold the rear seat down into the trunk.
Can it run on batteries?
It can. Contact Beams of Light (below) for specific power details and recommendations.
Do the lights change color?
No — the LEDs are a single color.
What if I need a replacement bulb or part?
Replacement parts are available from Beams of Light and can ship overnight. Standard compatible bulbs are also sold online and in hardware stores, though the manufacturer's bulbs are brighter with a warmer reddish-orange tone.
Gallery
Need help?
Product questions & parts
These menorahs are made by Beams of Light. For setup help, parts or technical questions, contact them directly:
Call / WhatsApp: 484-613-0101
